3
Mounting The Lock:
Step 1: With the gate in the closed position determine the best location for the lock and receiver.
Attach the lock to a solid surface or cross member to provide stability.
Step 2: Hold receiver and lock together (with receiver pin hole and lock slot aligned) against the gate
post and mark positions to drill receiver holes (see Illustration C & D, page 4). The receiver
must be mounted with bolts (not u-bolts) to allow lock to seat properly. Secure the receiver to
the gate post.
Step 3: Recheck the lock position and alignment and mark position to drill lock holes on gate supports.
U-bolts and saddles can be used to mount lock on chain link gate supports. Secure the lock to
the gate. Install clevis pin and locking cap by placing clevis pin through the slots in the lock
receiver and hammering the clevis pin into the locking cap (see Illustration B). Check and
adjust alignment if necessary.
Step 4: Determine the position for the control box and entry control (i.e. push button, keypad, etc.).
The control box must be located within 20 ft. of the lock and the entry control must be located
within 10 ft. of the control box (see Illustration A), unless monitored and operated by an
attendant at a nearby site (ex. guard house). When the entry control is activated, the Bulldog
locking pin retracts for 2-6 seconds, allowing the gate to be opened (see instructions for adjust-
ing timer on page 5). If the gate is not opened during this time, the pin will return to the locked
position.
Position the control box on fence post or other stable surface at least one (1) ft. above the
ground. mount the control box using the control box mounting screws provided (see Illustra-
tion on page 5). Mount the entry control using the appropriate hardware.
, Inc.
AUTOMATIC SOLENOID
SECURITY GATE LOCK
Lock and receiver need to be level.
Receiver pin hole and lock slot must line up.
Check this with pin out of receiver.
PVC conduit (recommended)
Push Button Entry Control (included)
Control Box (with battery
and control board)
Illustration A
Illustration B
Locking Cap
Assembly
(41 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales